Security screens are an excellent investment for enhancing the safety and security of your property. They offer numerous benefits, including protection from intruders and insects whilst also allowing ventilation and natural light to filter through. However, to ensure your security screens remain in top condition, regular maintenance and cleaning are essential. This guide will provide you with detailed steps and tips on how to clean your security screen doors effectively.
The Importance of Cleaning Security Screen Doors
Maintaining your security screen doors is crucial not only for aesthetic reasons but also for their longevity and functionality. While our products are designed to be highly durable and weather resistant, they still require periodic cleaning to maintain their appearance. This is because dirt and grime can accumulate over time, leading to potential damage if not addressed.
Trapped moisture can break down the powder coated surface of the screen doors. This can lead to rust and corrosion, which then compromises the door’s structural integrity and appearance. Regular cleaning helps to prevent this deterioration, ensuring that your investment remains secure and looks great for years to come.
Steps to Clean Your Security Screen Doors
Step 1: Open the Screen Door
Start by opening your security screen door to allow easy access for cleaning. If you need assistance with removing and reinstalling the door, we provide this service to make the process more convenient for you.
Step 2: Dust Off Loose Dirt
Remove any loose dirt and dust using a vacuum or a soft bristle brush. If using a vacuum, set it to a low suction to avoid damaging the mesh. Be gentle during this process to prevent bending or distorting the screen.
Step 3: Wipe Down the Screen
Prepare a cleaning solution by mixing clean water with a small amount of mild detergent. Avoid harsh and abrasive cleaners, which can damage the anodised surface of the screen. Use a soft sponge to wipe down the screen, being careful to avoid scratching. If you notice any small scratches, they can be buffed out with a good quality car polish, but be gentle to avoid removing the coated surface.
Step 4: Remove Excess Detergent Residue
After cleaning, use a new cloth to wipe away any detergent residue with clean water as leaving soapy residue on the screen can lead to deterioration of the powder coating, so ensure it’s thoroughly rinsed.
Step 5: Dry Thoroughly
Once cleaned, use a towel to pat dry the screen door and then allow it to air dry completely in the sun. Moisture left on the screen can cause deterioration over time, so thorough drying is essential.
So How Often Should You Clean Your Security Screen Doors?
The frequency of cleaning your security screen doors depends on the environment and location of your property. Regular cleaning is essential to prevent the buildup of dirt and salt deposits, which can be particularly aggressive in coastal or industrial areas. Here’s a general guideline:
- For rural areas (inland, away from urban and industrial areas): Clean every six months.
- For urban areas (away from coastline and industrial environment): Clean every three to four months.
- For coastal/industrial environment: clean every month.
By adhering to these cleaning schedules, you can extend the life of your security screen doors and keep them looking as good as new.
Maintaining Your Security Screen Doors
Regular maintenance and proper cleaning techniques are key to preserving the functionality and appearance of your security screen doors. At Factory Fit Screens, we are committed to providing high-quality products and expert advice to help you care for your security screens. If you have any questions or need assistance with your security doors, don’t hesitate to reach out to our friendly team. We’re here to help you keep your property secure and your screens in top condition.
